Not a surface.Engineering.
The surface that carries the heat: flat, exact, measurable.
Motion off
As you scroll, the plate turns and its dimensions are shown. The scene is visual only; the same information is on the page as text.
Cross-section
The difference isn't described, it's shown: the thinnest and the thickest plate in the catalogue, on one baseline and at one scale.
- PLATE THICKNESS
- 12.0 – 20.0 mm
- difference
- 8.0 mm
- COATING
- 35 µm
- GROOVE ANGLE
- 105°
Three sourcesone counterpartThree sources, one counterpart
- 019 variants
Our own production
From design to shipping, in-house; sizes and surface exactly as you specify.
- 02Write to us
Partner brands
The catalogue also carries solutions we do not make ourselves; you still deal with us.
Write to us - 03from a drawing
Project-specific
Work outside the catalogue is the normal path — send a drawing and we build it.
Request a custom size
One counterpart
Whichever route it comes through, one address carries the quote, the shipment and the responsibility: us.
Quick start
Start from a size and narrow the filter from there.
Made in the size you need
Your equipment defines the dimensions; we machine the surface around them. From size to surface configuration, every plate starts with a requirement.
Groove profile
The top view is to true proportion on both axes. The edge view is drawn enlarged so the thickness can be read.
1,200 mm
900 mm
PLATE THICKNESS
Surface
01
Dimensions
Width and depth are set by the equipment the plate goes into.
- WIDTH
- 325–1,200 mm
- DEPTH
- 265–900 mm
02
Thickness
Plate thickness is chosen for the working load and the housing.
- PLATE THICKNESS
- 12–20 mm
03
Surface
Smooth, grooved or both; the grooved area sits wherever the plate needs it.
- Surface
- Smooth · Grooved (ribbed) · Combi (half smooth, half grooved) · Textured
- Grooves
- Fully grooved · Half grooved · One third grooved · Not grooved
04
Grooves
Groove profile and angle come from the product specification.
- GROOVE ANGLE
- 105°
- Groove profile
- V groove · U groove · No groove
05
Edge and drainage
Manufacturing details such as drain position and splash guard, from the options that exist.
- Drain position
- Rear · Front · Left · Right
- Splash block
- AISI 304 · AISI 316 · Same as plate
06
Surface finish
Machined surface or plating; finish and coating thickness from catalogue values.
- Surface finish
- Mirror polished · Brushed · Super brushed · Matte
- Coating
- Uncoated (bare) · Hard chrome · Nickel · PTFE (teflon)
- COATING
- 35 µm
The sizes in the catalogue are examples. We produce your plate in your dimensions, with your coating. Request a custom size →